Model MAP-320 MAP-330 MAP-330R MAP-630 Sensor/AP MAP-625 802.11 Radio(s) Single a/b/g Dual 2 radios - a/b/g Dual 2 radios - a/b/g Triple 3 radios - a/b/g Dual n + a/b/g Data Rates Supported for 802.11 a/b/g/n            802.11a: 6, 9, 12, 18, 24, 54 Mbps            802.11b: 1, 2, 5.5 Mbps            802.11g: 6, 6 12, 18, 35, 48, 54 Mbps            802.11n: 100, 250, 540 Mbps (for MAP 625 only) Frequency Band for 802.11 a/b/g/n            802.11a: USA: 5.250 - 5.350 GHz, 5.725 - 5.825 GHz            Canada: 5.150 - 5.350 GHz, 5.725 - 5.825 GHz            Europe: 5.150 - 5.350 GHz, 5.47 - 5.725 GHz (varies by country)            802.11b or 802.11g: North America and Europe: 2.412 - 2.462 GHz            802.11n: 2.4GHz or 5.0GHz (for MAP 625 only) Modulation for 802.11 a/b/g/n            802.11a: OFDM            802.11b: DSSS            802.11g: DSSS            802.11n: OFDM (for MAP 625 only) Power Inputs External AC adapter or 802.3af PoE External AC adapter or 802.3af PoE 802.3af PoE sensor option External AC adapter or 802.3af PoE External AC adapter or 802.3af PoE Operating Modes AP, WLAN Monitor, WDS AP, WLAN Monitor, WDS configurable per radio AP, WLAN Monitor, WDS configurable per radio AP, WLAN Monitor, WDS configurable per radio AP, WLAN Monitor, WDS configurable per radio Simultaneous VSCs (SSID/BSSID) 16 16 16 16 16 Enclosure(s) Indoor Outdoor Indoor Outdoor Outdoor Indoor Indoor Networking Specyfication                                                         (Does not apply to Sensor) Configurable Operating Modes Per Radio  - Access Point (infrastructure)  - Wireless Distribution System (WDS)  - WLAN Monitor  - Simultaneous Access Point/WDS Networking  IEEE 802.1d compliant bridging, IEEE 802.1q VLAN tagging  DHCP Client, ARP (RFC 826), Inter Access Point Protocol Virtual Service Communities  Up to 16 SSIDs each with unique MAC address, configurable SSID broadcasts  Individual security and QoS profile per VSC  Configurable DTIM and minimum data rate per VSC  Each VSC mapped to separate 802.1q VLANs Client Access Control and Security Functions  802.1x authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAPTTLS and PEAP  MAC address authentication using local or RADIUS access lists  RADIUS AAA using EAP-MD5, PAP, CHAP, MSCHAP v2  RADIUS Client (RFC 2865 and 2866) with location-aware support  Layer-2 wireless client isolation  Encryption: IEEE 802.11i; Wi-Fi Protected Access (WPA2) with AES support;  Wired Equivalent Privacy (WEP) using static or dynamic keys of 40 or 128 bits Quality of Service (QoS)  L2/L3 classification: 802.1p VLAN priority, SpectraLink SVP, DiffServ  Wi-Fi MultiMedia (WMM), 802.11e EDCF, Service-Aware priority assigned by  VSC  Max. VoIP call capacity: 8 active calls on 802.11b, 30 active calls on 802.11a/g Network Management  Fully manageable using Colubris InCharge Network Management System  SNMP v2c, MIB-II with TRAPS, RADIUS Authentication MIB (RFC 2618),  Colubris extensions for user session control and AP management  Embedded HTML management tool with secure access (SSL and VPN)  Scheduled configuration and firmware upgrades from central server  Client event log records association, authentication and DHCP events  Packet capture tool for Ethernet and 802.11 interfaces (PCAP format) RF Management  Automatically selects channel on power-up and continuously optimizes channel  selection based on background interference scan  Configurable background rogue scanning  Automatically adjusts transmit power to minimize interference  Automatic radio shut-down upon LAN failure detection Wireless Distribution System (WDS) Mode  Configuration: Dynamic or manual link set-up  Topologies: Point-point; point-multipoint  Security: WPA2 peer authentication and encryption, VLAN tags  QoS: Priority queuing honored for all traffic  Configurable ACK Time Out  Peer DFS coordination in 802.11a channels WLAN Monitor Mode  Continuous full 2.4/5 GHz rogue scanning and optional SNMP TRAP generation,  reports discrepancies from centralized list of known APs.